Getting a bit further on the driver side. The floor has been patched out, the outer floor pan is in place.
I started patching the extended cab inner rocker backing plate area. It doesn't appear that a patch panel is made for this area so I started with a front backing plate, cut the upper flange off of it and extended the profile of the front. Although this repair panel originally for the front is not tall enough for the rear it contains the proper profile on the bottom flange for the inner and outer cab corner to nicely plug weld in place. I'll use some sheet metal to make up for the height difference.
I started patching the extended cab inner rocker backing plate area. It doesn't appear that a patch panel is made for this area so I started with a front backing plate, cut the upper flange off of it and extended the profile of the front. Although this repair panel originally for the front is not tall enough for the rear it contains the proper profile on the bottom flange for the inner and outer cab corner to nicely plug weld in place. I'll use some sheet metal to make up for the height difference.
You must be registered for see images attach