Members

someotherguy

even worse in person From Houston TX

Joined: Sep 28, 2013

Last seen: Today at 6:28 PM

Latest activity Postings About

- someotherguy reacted to Caman96's post in the thread Oh no..... with Angry.
  
  This recently happened. Don’t approach them unarmed.
  
  Today at 5:54 PM
- someotherguy reacted to BBslider001's post in the thread 1994 K1500 Suburban One Owner with Sad.
  
  I just got my answer. And yes I did on both the opening and the Ball Joint in the box. It measures 48.01 mm. The arms are reamed...
  
  Today at 4:22 PM
- someotherguy reacted to BBslider001's post in the thread 1994 K1500 Suburban One Owner with Sad.
  
  Wellllll, SOB….these K6509 do not fit these forged arms….and neither do the others called for a forged arm, K6477. I am looking but that...
  
  Today at 4:21 PM
- someotherguy reacted to steve3854's post in the thread P0785 with Like.
  
  Ok, in a last ditch effort, I rechecked the install. My dumb ass ran the cooler lines opposite, bottom on top and top on bottom in...
  
  Today at 4:19 PM
- someotherguy replied to the thread Wheel spacers.
  
  Yep, the stock wheels (and most, but not all aftermarket) on the lighter duty stuff is all lug centric. And it should tighten up...
  
  Today at 1:29 PM
- someotherguy reacted to PlayingWithTBI's post in the thread Replacing/Rebuilding my 700R4 for the last time! with Wow.
  
  DISCLAIMER: :deal: There was a miscommunication between us - the trans only had ~10K miles on it, which made this even worse! The Deep...
  
  Today at 1:23 PM
- someotherguy reacted to Misterman's post in the thread Wheel spacers with Like.
  
  Call these guys https://www.uswheeladapters.com/
  
  Today at 1:08 PM
- someotherguy replied to the thread TBI 350 lifter noise / Roller cam swap.
  
  Good stuff - looks like it's cheaper than you could buy the single pigtails for. In the few instances where I've had to swap, I just...
  
  Today at 1:02 PM
- someotherguy reacted to PlayingWithTBI's post in the thread TBI 350 lifter noise / Roller cam swap with Like.
  
  ^^^ here's the adapter harnesses and connectors. https://www.sprperformance.com/copy-of-sensors
  
  Today at 1:01 PM
- someotherguy replied to the thread TBI 350 lifter noise / Roller cam swap.
  
  The TPS connection changed in 1991. Earlier TBI's have a flat row of 3 large pins that are similar to a trailer 4 pin connection. From...
  
  Today at 12:43 PM
- someotherguy reacted to NickTransmissions's post in the thread P0785 with Like.
  
  Drop the pan and continuity test all of your solenoids, make note of any that are bad...The two shift solenoids and 3-2 control solenoid...
  
  Today at 11:51 AM
Show older items
Loading…
Loading…