caw_86
Reaction score
916

Latest activity Postings About

    • caw_86
      caw_86 reacted to someotherguy's post in the thread 13" NBS rear disc on 14 bolt SF with Like Like.
      I agree that you want good thread engagement but remember the typical gmt400 lugs have a long stretch of unthreaded area at the top end...
    • caw_86
      caw_86 replied to the thread 13" NBS rear disc on 14 bolt SF.
      That is the “rule” i kept seeing on google searches, Which is what i have, i double checked the measurements. The last 10mm or so of the...
    • caw_86
      caw_86 replied to the thread 13" NBS rear disc on 14 bolt SF.
      So i may be a big dumb dumb. i bought new axles and studs for my 14b axle, installed the calipers and rotors, everything seems fine. I...
    • caw_86
      did you run the pattern with load, service manual says 45 ftlbs of torque to turn the pinion to get a proper pattern, instructs to...
    • caw_86
      caw_86 replied to the thread 1998 2 door tahoe.
      The camera really does add 10 lbs, these are only 11.5”wide tires
      • IMG_1276.jpeg
    • caw_86
      caw_86 reacted to Erik the Awful's post in the thread 1998 2 door tahoe with Like Like.
      That "diagonal gouge" is machined that way to allow oil into the surface of the shaft that rides on that bushing.
    • caw_86
      caw_86 replied to the thread 1998 2 door tahoe.
      Transmission tear down under way, decided to go with a pro built automatics rebuild kit. Nothing to bad after taking it all apart This...
      • IMG_1270.jpeg
    • caw_86
      caw_86 replied to the thread 1998 2 door tahoe.
      Just needs oil, tires, and some big heaving muscles to move it Un
      • IMG_1261.jpeg
    • caw_86
      caw_86 replied to the thread 1998 2 door tahoe.
      Learned a few important lessons so far Caliper is only a mock up, brake lines will get cleaned up once i know where everything will be
      • IMG_1239.jpeg
      • IMG_1240.jpeg
      • IMG_1242.jpeg
    • caw_86
      caw_86 reacted to SNCTMPL's post in the thread 1998 2 door tahoe with Like Like.
      It’s like deja vu, all over again.
    • caw_86
      caw_86 replied to the thread 1998 2 door tahoe.
      I had to use the shim pack with my yukon carrirer, factory shin was too big. Did you encounter the same
    • caw_86
      caw_86 replied to the thread 1998 2 door tahoe.
      Complete 4.56 regear finished, getting those last 5-10inlbs of torque on the pinion out of a 700 ftlbs wrench is not the easiest...
      • IMG_1216.jpeg
    • caw_86
      caw_86 replied to the thread 1998 2 door tahoe.
      This was a fun puzzle to put back together after a year, still need to sew the string back, was really annoying having to undo the...
      • IMG_1139.jpeg
    • caw_86
      caw_86 replied to the thread 1998 2 door tahoe.
      More 25 year old fuel pump sender issues Just maybe its why the gas tank reads so erratic
      • IMG_1137.jpeg
    • caw_86
      Sorry it's been a while and I didn't think anyone really kept an eye on this post. Anyways, I found out what the problem was a month...
  • Loading…
  • Loading…
Top