Sean Buick 76
Latest activity Postings About
-
-
Appears to be a nice truck. Maybe take another pic when less alcohol on board. Or you live on some really hilly property. . -
Sean Buick 76 replied to the thread 94 TBI 350 in a 96..It wouldn’t be too bad if you harvest the electrical system from your TBI truck and swap it all in completely. Like the LS swaps where...
-
Use your short-block, bolt on Vortec heads and intake manifold.
-
Sean Buick 76 replied to the thread Drunkcanuks build...... finally!!!.Cool best of luck! Yes just back your truck in where no one can get to the back of it and you should be good.
-
Sean Buick 76 reacted to Drunkcanuk's post in the thread Drunkcanuks build...... finally!!! with
Like.
I'm not worried about it at work. It's a security controlled and patrolled lot, and back in parking only. If someone wants it that... -
Got it out. Had to take off the driver side exhaust manifold flange nuts to lower the exhaust pipe. It has to be some custom exhaust on...
-
Sean Buick 76 replied to the thread Drunkcanuks build...... finally!!!.Could you just wrap a tarp around it in the back of your truck to keep it safe while you’re at work the rest of the day? Or possibly...
-
Sean Buick 76 reacted to Drunkcanuk's post in the thread Drunkcanuks build...... finally!!! with Like.
Update time. Emailed the yard a few days ago, no response....shocked! Lol Called today, only one option to talk to a live person and...
-
Sean Buick 76 replied to the thread My 1994 K2500 Cheyanne Project.Cool truck! Have fun with the build
-
Sean Buick 76 replied to the thread going to a carby 408.Yes a manual valve body works too.
-
Another option to look at would be a manual valve body in the 4L60e. I believe that may work, could be wrong though!!! Lol
-
Sean Buick 76 reacted to Hipster's post in the thread Properly jacking up truck for shock replacements... with Like.
It can be if stuff is not placed correctly, Soft pine can also split/crush/move. Not a fan of wood blocks under the jackstand either...
-
Sean Buick 76 replied to the thread going to a carby 408.Personally I would do one of the following options as the 4L60E are very fragile trans when exposed to torque. 1. Find a 4L80E and...
-
-
Sean Buick 76 replied to the thread Front driveshaft removal.Normally you just remove the bolts and straps that hold the u joints to the front end, then use a large flat head or pry bar (at the u...
-
-
Loading…
-
Loading…
