Message is still there.Yeah, I saw it, enlarged it, and read it fine.
You must be registered for see images attach
Maybe your not normal?
I was thinking it was the emoji that was “offensive”.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Message is still there.Yeah, I saw it, enlarged it, and read it fine.
I already know that, tell me something IDKMaybe your not normal?
i dont know what you are trying to say. Im talking about how the ECM and the gauge dont read the same thing. the ECM is -40 or -30 to 260 ish and the gauge starts at 100 and goes to 260.this is from a '92 gmt400 FSM. 1400 ohm (cold aka 100*f) and 55 ohm (hot aka 260*f) falls within reason to the CTS values posted, FWIW....
EDIT: by placing a resistor in place of the temp sensor, one could easily "recalibrate" their temp gauge by moving the needle. i will possibly try this weekend if i can find my stash of resistors