-
-
Welcome to the forum, solid first post. I would start with a junkyard or complete parts truck. Why though? 95 is an in-between year... -
Das Hatt reacted to Road Trip's post in the thread Where and how many O2 / oxygen sensors in my 1990 V8 5.7L? (verifying what I see in the Chilton) with
Like.
And if you have any doubt about what you are looking at, simply take a photo & post it in this thread. Photos nearly always guarantee... -
Das Hatt reacted to PlayingWithTBI's post in the thread '88 TBI Suburban - Engine Overhaul - Help me plot this out with Like.
IDK if it needs a heated O2 but, I would always recommend one. That'll help keep your engine in Closed Loop at idle too.
-
Das Hatt reacted to ekulggats's post in the thread '88 TBI Suburban - Engine Overhaul - Help me plot this out with Like.
My understanding of the O2 Sensor is that it is an unheated model, that the Y pipe on the TBI's is deliberately slow flowing to 'warm...
-
Das Hatt replied to the thread '88 TBI Suburban - Engine Overhaul - Help me plot this out.The O2 sensor is located on the driver side manifold, not the Y pipe. So I guess technically you could leave the O2 sensor alone. If...
-
Das Hatt replied to the thread '88 TBI Suburban - Engine Overhaul - Help me plot this out.Y pipe is probably the biggest restriction right now. You you could do shorty headers and a mandrel bent Y pipe to the cat as long as...
-
Das Hatt replied to the thread TBI Injectors 2003 5.7 indmar Gm based.That would depend on what engine you have
-
Das Hatt replied to the thread 1988 350 tbi Rough Idle When Warm.How old are the plug wires, cap, and rotor? When you installed the IAC valve, did you perform the relearn procedure that's in the...
-
Das Hatt reacted to TylerSteez's post in the thread Just acquired an abandoned 92 sierra 2500 with the 7.4L. Looking for info and resources with Like.
wow you definitely have me beat lol, looks like you’d have to mow that grass on the floor in the summer lol
-
Das Hatt reacted to df2x4's post in the thread Where and how many O2 / oxygen sensors in my 1990 V8 5.7L? (verifying what I see in the Chilton) with Like.
I'm not super familiar with the O2 sensor setups on the '88-'95 trucks so I'll let someone else answer your question, but as a general...
-
Das Hatt reacted to Erik the Awful's post in the thread I bought a lowered C1500 and I need some advice on how to improve axle clearance and ride quality with Like.
When you use text-to-speech it's far more important to proofread your post before you hit "Post reply" and to insert punctuation. If...
-
Das Hatt reacted to Vikingdude's post in the thread Help, seize when cranking on cold starts with Like.
Sounds like a poor electrical connection or component somewhere. Checked/cleaned your grounds recently? Check battery voltage as...
-
Das Hatt replied to the thread I bought a lowered C1500 and I need some advice on how to improve axle clearance and ride quality.First off, punctation is your friend. Please use it. As far as the shock mounts go, the lower extenders are easy to put in. Unbolt...
-
The username does tho :rofl:
-
Das Hatt replied to the thread Rear lighting issues.I believe when viewing the forum on a phone the signature does not appear.
-
-
Loading…
-
Loading…
Latest posts
-
How do i do a tune up? 1995 Chevrolet K2500HD 7.4l- Latest: Erik the Awful
-
-
-
-
Staff online
-
df2x44L60E Destroyer
Members online
- Zfrnchy
- missouritig
- SNCTMPL
- Lextech
- scott2093
- fancyTBI
- Erik the Awful
- kmoto
- The Beast
- anderson5434
- SubXero0
- dsworo9
- adrian_805
- JS45
- aha6754
- Brwnelky
- Amsterdamned96
- Caman96
- johnckhall
- HDMAC07
- Stumpy
- JAR_19
- Moparmat2000
- Boots97
- MisterGrimm
- klockness
- yevgenievich
- Dk47
- Dan94
- rdhot80
- OutlawDrifter
- tahoesport
- CaptainSpalding
- df2x4
- aaronb
- thekalebfowler
- Archaic2021
- comesummer
- ditch bang
- Grayhead36