C
CumminsFever
Latest activity Postings About
-
-
CCumminsFever replied to the thread Cunningham Driving Shaft.Yes. No special modifications needed. It does help tighten the steering if your rag joint is sloppy.
-
CCumminsFever replied to the thread Cunningham Driving Shaft.I put it on my truck. Removed old one, installed this one. The plastic cover that factory puts over the steering shaft doesn't fit so...
-
CCumminsFever replied to the thread Cooling System Theory.Isn't the coolant in the block under a bit of pressure even with no thermostat? Meaning, the "restriction" would be the holes in the...
-
CCumminsFever replied to the thread 6.5 diesel.A burnt out "check engine" bulb? That is the longest lasting bulb on earth! Staying lit for YEARS of service, blinking and flashing, it...
-
CCumminsFever replied to the thread 6.5 diesel.Any air left in the line from your lift pump replacement was gone in a minute or 2 or running. The injector pump does a fair job of...
-
CCumminsFever replied to the thread Snagged up another one.. 94 GMC - Ol Blue.Very proper representation of the gmt400, I think it looks great as it sits, but I'm a sucker for a blue truck too! Do you still plan to...
-
CCumminsFever replied to the thread 6.5 diesel.Lift pump pressure of 7 psi is good, does it hold that pressure at 2000 rpm or even 3000 rpm? 6.5 injectors are a bit weird. They can...
-
CCumminsFever replied to the thread 6.5 diesel.While I would lean toward some type of fueling issue, it almost sounds like how I'd describe my old 6.5 with a bad lifter. But that is...
-
CCumminsFever replied to the thread 6.5 diesel.Clear line on the return should be enough to check for air in the system I'd like to hear a better description of the "rough running"...
-
CCumminsFever replied to the thread Eprom custom tuning for 283?.Thanks for coming back and updating us! This is absolutely awesome, and I bet it's a fun grocery getter that just makes ya grin when you...
-
CWelcome from Alberta Canada Look forward to seeing what you come up with.....and greybeards are definitely welcome!!! I don't call it...
-
CCumminsFever replied to the thread charlie.With your age comes experience! Welcome to the forum, we look forward to your experience helping us younger guys! I always enjoy...
-
CCumminsFever replied to the thread SAS discussion on alternative axles.Well, i admit, it's been that long since I crawled under an older truck that I forgot about the passenger side driveshaft. Thanks for...
-
CCumminsFever replied to the thread SAS discussion on alternative axles.I notice "everyone" uses the ford axles for the solid axle swaps. That seems to be the popular thing anyway. Could any one of you guys...
-
CCumminsFever replied to the thread 6.5 diesel Detroit Controversy.You owe me a keyboard. Mine has drool on it. That suburban is one fine looking vehicle, and the white truck is my next favorite to the...
-
-
Loading…
-
Loading…
