-
-
Cheezebandit replied to the thread 90-1500.Thank you. its been a journey so far, and we're still going. Check back later for more updates. -
Cheezebandit replied to the thread 90-1500.that was the one I cross threaded anyway, I knew the O ring was questionable at best, then I boogered the threads. I'll likely make a...
-
4th pic, that o-ring looks like it's flattened where it seals. I'd replace it if you have one handy.
-
Dude what a thread! Just read it all. I’m digging it:cheers:
-
Cheezebandit replied to the thread 90-1500.Made a little more progress today. Steering box swapped, Easy enough. Pitman arm nut is bigger than any wrench or socket I have...
-
-
Tonight I took care of a few small things on the truck. First, the door panel clips were wasted, and the door panels kinda flopped...
-
Cheezebandit replied to the thread 90-1500.
-
-
Cheezebandit replied to the thread 90-1500.I looked at the red head steering box, after seeing some pretty bad reviews, denied warranty for an aftermarket steering shaft, and...
-
Cheezebandit replied to the thread 90-1500.we've made it this far Scooter, you think I'm putting stock stock A arms back on it? No credit.. I decided on the level 2 front kit...
-
-
With all the upgrades you've done to the rear suspension you're not planning on running those stamped steel A-arms are you? Those are...
-
Cheezebandit replied to the thread 90-1500.Side note, when I purchased the truck it came with a handful of receipts for parts that were "on the truck". The 2 inch drop spindles...
-
Just read from Page 1. Nice work. These upper control arm bolts without cams look factory. They put plugs in there at assembly so no...
-
Cheezebandit replied to the thread 90-1500.They may have been factory arms, but they had been off before. the plugs were knocked out already and the bolts were on the passenger...
-
Cheezebandit replied to the thread 90-1500.Front continued.. I was pretty surprised at how heavy the factory AArms were. I weighed the arms and springs at 46 pounds combined...
-
-
Cheezebandit replied to the thread 90-1500.Front suspension tear down. After inspecting the brake lines, and front a arm bushings, I decided it was time for the front to be re...
-
-
-
Loading…
-
Loading…
