-
-
Ttayto replied to the thread Beefing up a 4l80e.if towing on flat or down hill I think OK to be in OD. going up hill pull the lever into 3rd. also note if you leave the shifter lever...
-
Ttayto replied to the thread Cooling system flush questions.best I've mentioned before on this forum i think, but the best flush product i've found for iron blocks is Motocraft VC9.
-
Ttayto replied to the thread Cooling system flush questions.stuff like prestone universal is a "dexclone" IIRC. also the formula for dexcool now has changed from when it was introduced.
-
Ttayto replied to the thread 4L60/700R4 Slams Into Gear, Delayed 1-2 Shift.i think in park it should be 75 to 90 psi. it has been almost 10 years since i messed around with this, but i remember backing it off 1...
-
Ttayto replied to the thread 4L60/700R4 Slams Into Gear, Delayed 1-2 Shift.Here's a snippet from a conversation I had with a well known internet transmission builder circa feb 2013. About a year before this I...
-
Ttayto replied to the thread 4L60/700R4 Slams Into Gear, Delayed 1-2 Shift.put a pressure gauge on your transmission and tell me what it does as you back off the tension on the tv cable. i prefer to setup my...
-
Ttayto replied to the thread 4L60/700R4 Slams Into Gear, Delayed 1-2 Shift.set your tv cable so it is tight at WOT. get a helper to hold the pedal to the floor and use of pair of pliers to pull on the end of the...
-
Ttayto replied to the thread 4l80e build.keep us posted on how the forward drum turns out. i have 2 early units I bought this spring haven't had time to tear them down to see...
-
Ttayto replied to the thread 4l80e build.I had a brain fart, i was thinking the sleeve sonnax makes for the direct drum. the omega one looks quality and price is reasonable....
-
Ttayto replied to the thread 4l80 swap questions that I can't find answers to..you should be able to bend your th400 hardlines to work.I would get a column from a truck with OD, I THINK 4l60e and 4l80e detents are...
-
Ttayto replied to the thread 4l80e build.the thing about sleeving it, is if it wears in the future you can easily resleeve it on your own. maybe can find a good one locally. for...
-
Ttayto replied to the thread 4l80e build.Th400 case bushing or late 4l80e pump bushing work fine & cheaper
-
Ttayto replied to the thread 4l80e build.your build should definitely do the job if setup correctly. overkill but i assume you've budgeted for that already haha
-
Ttayto replied to the thread 4l80e build.what is your power level?
-
Ttayto replied to the thread Adjusting rocker arms on L29 vortec with engine running.I had the same problem. i got delco ones but they are 5x the cost.
-
-
Loading…
-
Loading…
