-
-
Canadian Rust Bucket reacted to Erik the Awful's post in the thread '88 RCLB C3500 "Roscoe P. Coltrane" with
Like.
-
This makes sense!!! Your better off accessing the wires from the under the door sill covers or under the dash. The trim is a royal pain...
-
Canadian Rust Bucket reacted to Erik the Awful's post in the thread '88 RCLB C3500 "Roscoe P. Coltrane" with Like.
Pretty much finished the truck box + shelf. I have some 3/8" plywood around here somewhere that I'll cut for the shelves. I still need...
-
Canadian Rust Bucket reacted to Erik the Awful's post in the thread '88 RCLB C3500 "Roscoe P. Coltrane" with Like.
I bought a $36 4x8 sheet of 23/32 plywood. Sure, cabinet-grade birch might be "preferred", but that's >$80 a sheet, and my carpentry...
-
Sorry everyone, work has been brutal this last couple months with everyone getting tax returns. I haven't really had much time to work...
-
Canadian Rust Bucket reacted to 618 Syndicate's post in the thread The build of "Wh4t3v3rs" with Like.
What's new in your world sir? Inquiring minds want to know...
-
Canadian Rust Bucket reacted to MrPink's post in the thread '88 RCLB C3500 "Roscoe P. Coltrane" with Like.
@Wh4t3v3rs may be able to give you some more insight into this he does car audio for a living.
-
Canadian Rust Bucket replied to the thread '88 RCLB C3500 "Roscoe P. Coltrane".I think this is based on my setup. https://www.gmt400.com/threads/my-95-rclb-c1500.59020/post-1297622 If you do decide to go this...
-
Canadian Rust Bucket reacted to Erik the Awful's post in the thread '88 RCLB C3500 "Roscoe P. Coltrane" with Like.
I drew this up in TinkerCAD just to see if I want to do it. I have an old 12" Infinity sub from my '69 Cadillac, but the box is too big...
-
Take your time and you’ll be fine. You’ve done door bushings, this is about on par with that. Soak them for a week. Spray them daily...
-
Canadian Rust Bucket replied to the thread Seat belt buckle bolts stuck.What you can do to help loosen the bolt before you try to turn it out again is heat it up gently with a torch. Then take the candle out...
-
Canadian Rust Bucket reacted to alignman88's post in the thread Build of my ‘88 RCSB C1500 owned for 20 years with Like.
Got the core support/cooling system mounted, fans plugged into relays, just need to connect the fan trigger wires to the Sniper system...
-
Here’s a picture of that dash duct that covers the harness. The harness is bundled together in a plastic channel and clipped into the...
-
Canadian Rust Bucket reacted to Schurkey's post in the thread I've been fighting a rough idle for a while with Like.
First Guess: Crappy module in replacement distributor. TBI RPM signal is generated by the pickup coil/reluctor, then processed by the...
-
Canadian Rust Bucket replied to the thread My '95 RCLB C1500.So as usual I was delayed by unexpected complications; this time it was the truck not starting. After some help from the forum and a few...
-
-
-
Loading…
-
Loading…
