-
-
Piratehunter reacted to PlayingWithTBI's post in the thread My Flat Tappet Cam Wiped Out So I Decided To Go Roller with
Like.
Keep in mind my 700R4 is a "Stage 2" trans rated for 500+ HP :rolleyes: YEAH, RIGHT :bs: -
Piratehunter replied to the thread My Flat Tappet Cam Wiped Out So I Decided To Go Roller.I had closely that engine in my ‘87 K1500, nv3500, 4:11, 35” tires. Very impressive power, and I did apply too much of it once...
-
Piratehunter reacted to PlayingWithTBI's post in the thread My Flat Tappet Cam Wiped Out So I Decided To Go Roller with Like.
Nah, my 10 bolt will die first :(
-
Piratehunter reacted to PlayingWithTBI's post in the thread My Flat Tappet Cam Wiped Out So I Decided To Go Roller with Like.
Well, I said "Screw It", and ordered the Blue Print 383 short block, it's 30 - 45 days out. :33:
-
Piratehunter replied to the thread L29 0411 Swap - Struggling with crank relearn and P0300.There is a dimple on one side of the dizzy gear above the pin. It is supposed to be positioned with the rotor contact. That said...
-
-
Piratehunter replied to the thread Vortec 7.4 keeps blowing up water pumps.Im inclined to think a bad pulley or tensioner transferring too much pressure on the impeller shaft. Does the PS pump pulley line up...
-
Piratehunter replied to the thread My 454 Rebuild.where on the manifold did you connect to for the vacuum gauge reading? just wondering for myself. thanks
-
Still have some work left to do but it is alive.
-
Piratehunter replied to the thread 99 L29 454 build.I sourced a lot of my parts on Amazon, two day delivery and free returns. Got a new ACDelco Professional water pump for $25. it was...
-
Piratehunter reacted to Reluctanse's post in the thread Riggs - My 2000 Chevy 3500 4x4 CCLB work truck and family play machine with Like.
That is a huge help, yes thanks!! I was looking through my pics from when I did the original swap but can’t find anything useful.
-
Piratehunter reacted to L31MaxExpress's post in the thread Steering Pump Bleed Procedure? with Like.
I do not go more than about 5 times lock to lock. Recheck the level and 5 times lock to lock. Once it stops drinking fluid from the...
-
The factory-recommended method has helped me numerous times, including getting my 3500HD back up and going after it sat open for an...
-
Piratehunter replied to the thread Riggs - My 2000 Chevy 3500 4x4 CCLB work truck and family play machine.Don’t know if these pics will help you, I took them with the upper plenum off. with #1 at tdc the rotor was right in line with the rear...
-
-
Piratehunter replied to the thread 99 L29 454 build.Mine were still ok. I did have an hour setback during engine install. I had separated the mounts during removal, during engine install...
-
Piratehunter replied to the thread L29 0411 Swap - Struggling with crank relearn and P0300.the picture of the cap peaked my interest...rotor phasing maybe?? haven't spent time to understand how to correct on our...
-
-
Loading…
-
Loading…
Staff online
-
df2x44L60E Destroyer -
kennythewelderB31-3 (6-G) certified