-
-
dirtautoguy replied to the thread Heater hoses.I got the heater hoses at napa it doesn’t look like there is a lot of options for them. The radiator hoses are not very old neither is... -
Unfortunately my radiator has sprung some leaks and needs to be replaced. Since I’ll be in there I’m going to get new heater hoses...
-
dirtautoguy replied to the thread 242 t case swap.It’s a $100 and supposedly has 85000 miles on it but I can’t confirm that. I’ll ask about the truck it came out of. The thing is if Iv...
-
dirtautoguy replied to the thread 242 t case swap.Iv been doing some research and found some things. Apparently a 241 t case of a 2500 will have a 32 spline input shaft while a 1500...
-
dirtautoguy replied to the thread 242 t case swap.I’m fairly positive my truck has a 241 t case. It is manual shift. Iv heard that as well. Iv also heard those pads get messed up if...
-
So maybe this will be a super easy question maybe not… I have a 96 k1500 rcsb. It has 285000 Miles. It’s had a lot of work done to it...
-
Giving the pins a few degrees twist tightens them up.
-
dirtautoguy replied to the thread Fuel pump relay.I did the amp test again and got about the same. I did notice however that the oem relays I got at the salvage yard and the after market...
-
dirtautoguy replied to the thread Fuel pump relay.I finally got some time to do some investigating. The receiver pins in the fuse box look fine and seem to be tight. I did do an amp...
-
dirtautoguy replied to the thread Fuel pump relay.I put the fuel pump in roughly 30000 miles ago and maybe 5 years? The filter has been replaced since then. I do have a multi meter...
-
dirtautoguy replied to the thread Fuel pump relay.Oh I forgot to mention it is a 96 k1500 rcsb. And It has had the updated harnness. I know of the connection on the frame rail near the...
-
Roughly a year ago my truck lost connection to the fuel pump relay due to a pin melting. I moved the pins to a vacant slot in the fuse...
-
-
dirtautoguy replied to the thread Radiator repair..So unfortunately I got really sick for a while and we needed to radiator. I ended up using some jb weld. I know it’s not ideal but I had...
-
dirtautoguy replied to the thread Radiator repair..I looked at it closer last night. It is leaking on the upper side of the yellow circle. And runs down the inside of the radiator where...
-
-
dirtautoguy replied to the thread Radiator repair..From what could see the leak is right on top I’m wondering if it could be done with it in the vehicle? There used to be a radiator...
-
-
Loading…
-
Loading…
Latest posts
-
Spyder headlamps.....my take on 'em...and LIGHTING in general- Latest: shovelbill
-
-
-
-
Members online
- man-a-fre
- andy396
- BuiltToWork
- 0xDEADBEEF
- 95burban
- DerekTheGreat
- wwilson
- missouritig
- Dk47
- JaguarIV
- fancyTBI
- Caman96
- jce98
- termite
- caw_86
- adrepok
- Supercharged111
- jhncrwfrd2
- redwings
- TreeGeared
- Greenwood90
- Archaic2021
- VIKING_MECHANIC
- Travon
- johnckhall
- JS45
- Tommy1234
- 97GMCC2500SLE
- Wilecoyote
- Nordin
- Wh4t3v3rs
- Magic
- jjester6000
- PolarBear
- Check251
- OBSlates
- Rocket Surgeon
- Joe Dirte
- Nad_Yvalhosert
- HotWheelsBurban
- Erik the Awful
- Chevy4x4
- TylerBjr
- Kerryadammackay
- shaneroze