Ehall8702
I'm Awesome
.Never heard of a ball joint flip. There are a couple of after marker uca that state for a 3-4” lift. ?
Lots of ppl flip balljoints to gain camber, slot ur cam bolt holes and there is ALOT of gained adjustment. Not gonna buy $300 ucas cause I'm just not gonna out that kinda cash there when there are many other things that take priority first. I cut my bump stops an inch lower and welded plate back to make them solid, added a diff drop , slotted my cam bolt holes and got an alignment, didn't need bj flip to get it in spec but showed alignment guy what I had in mind and he said that would help him out in alot of cases cause even slotting doesn't get you enuff adjustment sometimes.