-
-
caminonut reacted to murphy455's post in the thread 1991 C/K 1500 instrument needle gauge cluster with Tack in kilometers with
Like.
I now have four 91 tach and gauge clusters 3 V8 and 1 V6 like magic they all popped up under my nose in Indiana -
caminonut replied to the thread AC Compressor Seal Replacement?.post what year and model you have and also what type of compressor to get Help in fixing your problem. Replacing the compressor seal or...
-
In simplistic terms you want a cam that makes power to about 5700-6000 with a broad torque range. There may be better cams but I...
-
This ^^^ The R4 compressors (you said it's a 1991) are known to leak, check for leakage around the input shaft and the body of the...
-
caminonut replied to the thread pressure relief valve.Hook up a set of gauges on it and see what the pressure is on the high side, if your orifice tube is becoming clogged, it could build up...
-
caminonut replied to the thread 1991 AC leak.look at the front of your compressor to see if it is dry, if you have a small leak at the compressor seal, Rub your finger on the center...
-
Sure! A couple terms to remember. ICL - Intake Centerline. It is specified in crank degrees from TDC. LSA - Lobe Separation Angle...
-
Yes the P/L actuator is riveted to the door inner module/panel, and the rivets come loose after a few decades. Then two things happen...
-
caminonut replied to the thread New guy from NC.Welcome, you did find a good place if you’re looking for Great information on these vehicles.
-
caminonut replied to the thread Gauge Cluster Issues.Changing to another cluster not solving the problem. Sounds like you may have a loose connection problem Where the plug attaches to the...
-
Disconnect the hose on the backside of the nozzle. Use a rubber-tipped air nozzle to shoot air backwards through the nozzle. Anything...
-
1. Remove wiper arms - look where they mount on the wiper tower. Slide the clip down then fold the arm (may be backwards on that order...
-
-
Loading…
-
Loading…
