1989k2500
OBS Enthusiast
Clamped or bolted?It's clamped to the top of the bell housing. You can get at it from underneath and loosen it to get some slack out of it.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Clamped or bolted?It's clamped to the top of the bell housing. You can get at it from underneath and loosen it to get some slack out of it.
IIRC the clamp is bolted to the bell housing.Clamped or bolted?
Sir my 454 Denso pump 951-5015 i suggested is still going strong, 12psi pressure stock fpr spring.Here is a quick update. My ep381 fuel pump failed after less than 3 months.
Symptom was the obvious no fuel at the fuel filter and no fuel at the fuel pump connector. The fuel pump did engage with key turned as it was supposed to. Closer inspection showed that the pump did indeed pump fuel but the fuel did not exit out of the top, but rather on the side where a spring and I guess some over pressure is located?
I was hopping that the rubber hose between pump and hardline has failed, but that was not the case here.
So I bought a new pump.
You must be registered for see images attach