-
-
AAnchor replied to the thread Oil cooler cleaning.JD GMC. Man you have an inquiring mind. Lots of work but you get results. Thanks for your post.
-
AAnchor replied to the thread Oil cooler cleaning.This 92 has in the radiator cooler. Thank all of you for your input. I think for the time being at least, I am going to put another...
-
AAnchor replied to the thread Oil cooler cleaning.Thank You
-
AHi; I searched as best I could for similar problems but came up empty. I probably ask too many questions here but I always appreciate...
-
AAnchor replied to the thread No start after rebuild.Thank you Shurkey and Roadtrip for your input. Can't believe it but I had the timing 180 off. I put a finger in the #1 plug hole and...
-
AAnchor replied to the thread No start after rebuild.Thank you Shurkey. I was watching the rockers and was pretty sure I had it right for tdc #1. Would it not be popping like crazy if 180...
-
AAnchor replied to the thread No start after rebuild.Sorry, 1992
-
AProject I started last year and am finally getting around to finishing. Engine in project truck was ruined by previous owner when brass...
-
AAnchor replied to the thread Sizes for bell housing and dust cover bolts on 1992 K1500.Thank you.
-
AAnchor reacted to GoToGuy's post in the thread Sizes for bell housing and dust cover bolts on 1992 K1500 with
Like.
Did you do a parts search at " GMPARTSGIANT.com " . Use the enter vin parts search, then just click the part section. The hardware... -
AAnchor posted the thread Sizes for bell housing and dust cover bolts on 1992 K1500 in Engine Performance + Maintenance.Have searched to no avail for the sizes of these sets of bolts. When I removed the old engine some of the bell housing bolts were loose...
-
AAnchor replied to the thread 5.7 flywheel neutral or external balance?.Thank you Shurkey. Am comfortable now using the flex plate I picked up. Would have responded earlier but all our ewes seem to be...
-
AAnchor replied to the thread 5.7 flywheel neutral or external balance?.Thank You for prompt reply. The flexplate from the stroker has one set of 5 holes and one set of 4 holes drilled. I also have an...
-
AAnchor replied to the thread 5.7 flywheel neutral or external balance?.Hi Schurkey: I follow your comments frequently on this forum and need your confirmation. I pulled out a damaged 383 stroker from my...
-
-
Loading…
-
Loading…
