HotWheelsBurban
Latest activity Postings About
-
-
-
HotWheelsBurban reacted to someotherguy's post in the thread son of a gun!! cannot get hydro boost to bleed !! with
Like.
I've often posted the power steering bleed procedure scanned straight from my 1994 C/K service manual, but recently someone had said it... -
So I've owned the Suburban for a few weeks now and I'm really liking it so far. This is my 2nd GMT-400, I previously owned a mint 94...
-
Looks just like mine
-
HotWheelsBurban reacted to L31MaxExpress's post in the thread BIZARRE end to the hunting/stumbling idle issue on my ‘95. with Like.
As I stated earlier from experience with these TBI trucks, make sure whatever valve you install has the pin hole metering orifice...
-
Tx....I like the look and spent the extra time to detail , paint and repair the old outer dash bezel as well ...The headlight switch...
-
ECU wasn't the issue. It's been in the shop for a little over a month now. For the code 24 they hooked up a scanner and saw fluctuations...
-
HotWheelsBurban replied to the thread 1998 2 door tahoe.At least it's not like on the carb trucks, with the mechanical fuel pump that'll get nailed by the passenger side bolt when it comes...
-
Show of hands, who inspects if a vehicle has motor mount bolts when you buy it, cuz this thing s had none, whoops
-
Thankfully, it's not dripping so at least the gear oil is holding. My shop has a 2 year warranty on their work and I had this replaced...
-
Or transfer the backing plates and 11.x brakes to the new axle. Better yet--grab a "light duty" K2500 axle with six lugs and the same...
-
I don't know what style of temp control panel the '91 uses. If it's anything like my '88, the solder joints connecting the circuit...
-
Check the service manual. https://www.gmt400.com/threads/88-98-service-manuals.43575/ Cell/section 62 in the...
-
HotWheelsBurban reacted to strikk's post in the thread Sal's K2500 Dana 60 Solid Axle Swap with Like.
Don't use POR15, you wont see it in any professional bodyshop. If you want to find one, sure go for it. The rear track width is...
-
Thanks for the info. I really like that air intake set-up. For me, I used an aftermarket AC bracket, as my 305 had a steel ac bracket...
-
-
Loading…
-
Loading…
