L
Reaction score
240

Latest activity Postings About

    • L
      Leeztruk replied to the thread Hi/Lo beam situation.
      Well, diagnosis is confirmed. Drove out the pivot pin and removed the shift lever. Sure enough, the spring is broken. The lever does...
      • DSCN0761.JPG
    • L
      Leeztruk replied to the thread Shifter Linkage 700R4.
      Sorry 'bout that. My bad. I'm going to a boneyard next week to check out a '90 2500. It's automatic, so the linkage should still be...
    • L
      Leeztruk replied to the thread Hi/Lo beam situation.
      Thanks for looking, SOG. I also have a breakdown illustration, and like you found, there is NO picture of the shift lever. Maybe there...
    • L
      Leeztruk replied to the thread Hi/Lo beam situation.
      That's a new one to me. The one I located is in Blackstone (Henry's Auto Parts). I searched on Car-Part.Com, to find something...
    • L
      Leeztruk replied to the thread Shifter Linkage 700R4.
      Here ya go. My truck is an '89, so should be compatible, although it's LS/4L60E swapped. Trans. is almost identical, externally, to the...
      • DSCN0712.JPG
      • DSCN0713.JPG
      • DSCN0714.JPG
    • L
      Leeztruk replied to the thread Hi/Lo beam situation.
      Well, I purchased a replacement column, from a '93 Suburban. I need to remove the shift lever, because, I assume, the spring for the...
    • L
      Leeztruk replied to the thread Brake code ID.
      Thanks Paragon. Think it's time to pull a wheel and do some measuring!
    • L
      Leeztruk posted the thread Brake code ID in Axles + Brakes.
      Trying to ID the brake system on my '89 Cheyenne. The SPID shows a J code of J50. Can this be considered the JB5 system? It's the only J...
      • DSCN0741.JPG
    • L
      Leeztruk replied to the thread Hi/Lo beam situation.
      Well, looks like I'll be following Mr. Shurkey's advice. The rod I thought was the dimmer rod is actually the ign. switch rod (that's...
    • L
      Leeztruk replied to the thread Hi/Lo beam situation.
      Don't know the trucks' history, but someone has been in the column before. The key buzzer doesn't work, and the tilt lever was less than...
    • L
      Leeztruk replied to the thread Hi/Lo beam situation.
      Yeah, got the tools to get inside the column. And yeah, have ordered the parts you've mentioned already. I too, use Std. and GM stuff...
    • L
      So, after owning/driving my '89 Cheyenne for a couple of years, last Friday was the first time to drive it at night. Went to use the...
    • L
      You can leave the one's on the drivers side capped. They're for engine oil cooling, which you probably don't have. The enclosed tank is...
    • L
      Leeztruk replied to the thread Whining alternator on my ‘94.
      As mentioned earlier, actually listen to your components. Use a long screwdriver, or even a dowel, and put one end on a suspected noise...
    • L
      Well, it's available if you need it. Just drop me a line. Gotta be careful with those air drills. You could end up burning the tip of...
  • Loading…
  • Loading…
Top