I’ve got a 1996 C1500 with a 2In rough country lift kit on it. Truck only has 77k miles and the kit only has 3k miles on it. Everything to do with the kit is 100% sound so it’s not the issue. Every time I get the truck aligned (5 times now) within a day after going over a few light bumps (no major potholes or anything but EX. Maybe a filled in pothole or something similar) the alignment on the truck is all screwed up and the wheel doesn’t point straight again. The wheel will also sometimes change places as you’re driving if you go over a rough patch of highway or similar. I’ve already confirmed it’s not the tie rod adjustment sleeves by measuring out their location with a correct alignment and checking again after it got screwed up. I then finally bit the bullet and took it to a mechanic who couldn’t figure it out either. Also feels important to point out that the issue started about a month and a half after the kit was installed so it shouldn’t be anything to do with the work that was done. I’m really lost at this point, any help is greatly aprichiated.