E
eran tomer
Latest activity Postings About
-
-
Eeran tomer replied to the thread L96 swap.don't know what's an e38 but if i do the swap i'll take the ecm too.
-
EI prefer the 4l80 over the 6l80 transmissions. So if it were me, if keep the 4l80e in place. You need motor mount adapters to keep your...
-
Eeran tomer replied to the thread Tbi air cleaner.
-
Ehello provided i get a 2011 4X4 silverado donor with L96 engine. what's involved in swaping it to a 4X4 95 suburban with 4l80e? swap the...
-
Eeran tomer replied to the thread Radiator.valeo from rockauto.
-
EThe diagrams are identical. It's NOT THICKER! It's the larger diameter hose. Stop saying that, it's not ketchup. Look at the diagrams...
-
EWhich hose is bigger? The one coming from the EGR valve, or the one coming from the throttle body? Put the big hose on the big nipple...
-
Eeran tomer replied to the thread 95 tbi E.g.r. Solenoid.When you hold it with the ports to the rear as seen on the air cleaner the left one is the thick one.
-
Eeran tomer replied to the thread 95 tbi E.g.r. Solenoid.The left port on the solenoid as shown on the sticker is the thicker one. The cleaner is original. I’ll have to measure the ports…
-
-
Eeran tomer replied to the thread 95 tbi E.g.r. Solenoid.so the sticker on the air cleaner shows the opposite.
-
Eeran tomer replied to the thread 95 tbi E.g.r. Solenoid.5.7 emissions above 8500.
-
EI would guess the smaller one but, you can hook it up, go out and cruise for a while, the engine has to be up to operating temp and you...
-
Ewhat’s the correct hosing for this type of solenoid? ie which port goes where? On the air cleaner it shows the hose from the throttle...
-
-
Eeran tomer replied to the thread Harness wire specifications question.solder yes.
-
Eeran tomer replied to the thread Harness wire specifications question.why the manual says not to weld a damaged wire or connector?
-
-
Loading…
-
Loading…
