Will they tuck

[Mjahn87]

Looking to go lower with my 91 c1500. Djm spindles, shackles and hangers currently. Was planning on cutting the stock springs in the front. As for the rear I’m thinking beltech 4inch leaf and put original shackles in the back. And a c notch of course. Will I run into any issues doing this as opposed to a flip kit and re doing hangers?

Also I’m curious if I’ll have clearance issues in the front. I have 17x8s with 0 offset and 4.5 back spacing I believe.

 

[Mjahn87]

Ok I did some research and will be doing a flip kit in the rear, replace the shackles and hangers with originals.

Just need to know if these wheels will tuck

 

[Seanthemechanic]

Make sure you run the proper shocks all around. That’s one of the most important things on a lowered vehicle.


Sent from my iPhone using Tapatalk

 

[sewlow]

Make sure you run the proper shocks all around. That’s one of the most important things on a lowered vehicle.


Sent from my iPhone using Tapatalk

Bell Tech Street Performers.