Looking to go lower with my 91 c1500. Djm spindles, shackles and hangers currently. Was planning on cutting the stock springs in the front. As for the rear I’m thinking beltech 4inch leaf and put original shackles in the back. And a c notch of course. Will I run into any issues doing this as opposed to a flip kit and re doing hangers?
Also I’m curious if I’ll have clearance issues in the front. I have 17x8s with 0 offset and 4.5 back spacing I believe.
Also I’m curious if I’ll have clearance issues in the front. I have 17x8s with 0 offset and 4.5 back spacing I believe.