skylark
I'm Awesome
To the op. If you are willing to spend that kind of money on a set of heads then you need to check out some of the budget options that are aluminum heads through Summit site. for about six hundred bucks a piece you can get some nice aluminum heads. Check them out and post back here if you have any questions. That cam that you were choosing is definitely a bit small and it is a flat tappet cam. You'd be much better off with a roller set up. As far as the injection goes you really can't beat f i Tech. Yes you could go with a dynamic EFI ebl Flash but there's still quite a bit of a learning curve and you still have to mess with it for a while until it's right.
As far as the my ***** is longer Small Block vs LS contest, I too agree that the ls is a better platform but the small block does have its place. Neither engine is a bad engine and the ls typically is more efficient. As far as magic tuning in combos go I believe you guys have probably seen my previous post. If you haven't, don't believe the crap that you're being spouted hear about magic tuning and Magic setups. Get some real-world advice and only believe about 10% of the crap that you here on here. Educate yourself and keep away from Fast talkers.
Just because this thread has been thrown completely off track anyway, I like peppermint ice cream. How about you guys?
As far as the my ***** is longer Small Block vs LS contest, I too agree that the ls is a better platform but the small block does have its place. Neither engine is a bad engine and the ls typically is more efficient. As far as magic tuning in combos go I believe you guys have probably seen my previous post. If you haven't, don't believe the crap that you're being spouted hear about magic tuning and Magic setups. Get some real-world advice and only believe about 10% of the crap that you here on here. Educate yourself and keep away from Fast talkers.
Just because this thread has been thrown completely off track anyway, I like peppermint ice cream. How about you guys?