Teal daily driven farm truck.

[Caman96]

Oh yeah that’s your coil wire hitting! Is that your plenum gasket(orange) bulging out in your last photo?

 

[HotWheelsBurban]

Oh yeah that’s your coil wire hitting! Is that your plenum gasket(orange) bulging out in your last photo?

That's what I was thinking, the distributor is backwards. Cause I know the cap only fits one way, and the coil nipple is on the passenger side.
There's not much extra room back there though....

 

[xXxPARAGONxXx]

I got it. I was 180 around on the distribution

You must be registered for see images attach

 

[89obsSB]

Oh yeah that’s your coil wire hitting! Is that your plenum gasket(orange) bulging out in your last photo?

Looks like the orange on the lower intake

 

[Caman96]

Looks like the orange on the lower intake

Yeah probably, but the gasket is orange too, your probably right though.

 

[Orpedcrow]

You must be registered for see images attach

It runs! No issues. Fired right up. I’ll take a video tomorrow I’m whooped

 

[Orpedcrow]

Oh yeah that’s your coil wire hitting! Is that your plenum gasket(orange) bulging out in your last photo?

It’s the intake. This Chinese plastic thing has a black gasket pre-installed.

You must be registered for see images attach

I know man Daggum “smart” phones.

 

[Orpedcrow]

Engine and accessories look really great though! Your PS pump is similar to my AC pulley. It was all boogered up too. And the tool was the same.

Thanks man, I’m happy with the color combo.

I did find my bluepoint “master pulley removal and installation tool” set, right in my toolbox next to my tap sets.

Some marvel mystery oil, a pipe cleaner and some compressed air in the end of the pump shaft and the tool worked like intended.

 

[Orpedcrow]

Some notes while I’m thinking about it. Need more antifreeze. Bolt seats. Tighten intake tube. Change oil filter. Change a/c orings before installing hoses. Tidy plug wires.

 

[89obsSB]

Yeah probably, but the gasket is orange too, your probably right though.

I’ve never seen an orange plenum gasket. The only ones I’ve seen are blue or black on these