Members

BuiltToWork

I'm Awesome From Stafford, VA

Joined: Nov 28, 2022

Last seen: Today at 10:17 AM

Latest activity Postings About

- BuiltToWork reacted to PlayingWithTBI's post in the thread 7747-7427 Swap with Like.
  
  Yeah, it goes into OL. I'm curious, does your 7427 and mask have a HyWay Lean Cruise routine for SA and AFR?
  
  Today at 10:38 AM
- BuiltToWork reacted to Scooterwrench's post in the thread 7747-7427 Swap with Like.
  
  Yeah,I'm going to flatten out my VE table then datalog and run it through that spreadsheet. Rinse and repeat!!! Today's datalog showed I...
  
  Today at 10:35 AM
- BuiltToWork reacted to PlayingWithTBI's post in the thread 7747-7427 Swap with Like.
  
  Then I'll run a few "Learn VEs" to see how close I am. :waytogo:
  
  Today at 10:21 AM
- BuiltToWork reacted to PlayingWithTBI's post in the thread 7747-7427 Swap with Like.
  
  Here's what I'm running now - just lowered my fuel from~ 91% to ~85. We'll see.
  
  Today at 10:21 AM
- BuiltToWork reacted to PlayingWithTBI's post in the thread 7747-7427 Swap with Like.
  
  Here's what I just did the other day with mine to get my AFR closer to 12.5 and DC down below 100% :33: I'll be trying it out next...
  
  Today at 10:21 AM
- BuiltToWork reacted to Scooterwrench's post in the thread 7747-7427 Swap with Like.
  
  I figured it out. Makes for a nice smooth table huh. I highlighted the entire table and used XY. Have to see how well the motor likes...
  
  Today at 10:20 AM
- BuiltToWork reacted to PlayingWithTBI's post in the thread 7747-7427 Swap with Like.
  
  Yeah, that's what I was trying to say :33: OK, let's say you wanna reduce your fueling by 10% at WOT, multiply your 100 MAP column by...
  
  Today at 10:20 AM
- BuiltToWork reacted to Scooterwrench's post in the thread 7747-7427 Swap with Like.
  
  That's were I set the initial timing on the 355 too. After I figured out what the engine liked I did set the base timing back to 0...
  
  Today at 10:19 AM
- BuiltToWork reacted to PlayingWithTBI's post in the thread 7747-7427 Swap with Like.
  
  I don't think you need to do that, FWIU the ECM doesn't use the SA tables until it gets feedback of 400+ RPM but, I may be wrong. It...
  
  Today at 10:17 AM
- BuiltToWork reacted to Scooterwrench's post in the thread 7747-7427 Swap with Like.
  
  Well I'm getting closer. I datalogged another trip and it was still rich then it hit me,I hadn't added enough timing and was probably...
  
  Today at 10:16 AM
- BuiltToWork reacted to Scooterwrench's post in the thread 7747-7427 Swap with Like.
  
  Well not much progress today,damn cuckoo clock. I did try running a 7427 truck .bin figuring the fuel table would be closer to the...
  
  Today at 10:14 AM
- BuiltToWork reacted to Scooterwrench's post in the thread 7747-7427 Swap with Like.
  
  I opened the off idle table and instead of going by rows and columns I highlighted the whole table and smoothed then opened the 3D graph...
  
  Today at 10:14 AM
- BuiltToWork reacted to PlayingWithTBI's post in the thread 7747-7427 Swap with Like.
  
  I checked that out a few years ago but it was TLDR all of it. A lot of the smoothing tables are now easier with the Interpolating...
  
  Today at 10:13 AM
- BuiltToWork reacted to Scooterwrench's post in the thread 7747-7427 Swap with Like.
  
  Have you ever discovered this...
  
  Today at 10:12 AM
- BuiltToWork reacted to PlayingWithTBI's post in the thread 7747-7427 Swap with Like.
  
  Yeah, that's my plan anyway :headbang: thanks!
  
  Today at 10:12 AM
Show older items
Loading…
Loading…