Or in Canada we call it Newton/Meters.
not in my part of Canada, KM's, liters, (l/100km) and degree's C, that's as metric as we go. Liters, not litres either.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Or in Canada we call it Newton/Meters.
Has anyone ever had the stupid brackets that hold the taillights in our trucks break? Mine did this morning and it was just dangling from the wires and I check the other side and it was cracked too and Fixing to fall off itself. These are only 4 months old. Was wondering if this has happen to anyone else and how did they fix it and prevent it from happening? I’m going to use some gasket maker and then use some JB weld on the outside too make it stronger and hopefully hold
These are better choices then making a gasket on your tail lights.What bed-liner is that? It looks really nice, looks well done.
For future reference, I've had good luck with:
https://www.permatex.com/products/adhesives-sealants/epoxies/permatex-plastic-welder/
The Harbor Freight plastic welding kit works well too.
Just make sure what you're fixing is scuffed up and cleaned well with isopropyl alcohol.
The bedliner is rustoleum bedliner was in 1 gallon can and I rolled it on but I added some extra grip to the bedliner. Bought some of that grip additive from Lowe’s that u put in paint for patios or steps so u don’t slip. Put two pouches in it and it made it look like it was sprayed in. Also used the rollers that adds texture to your walls to roll the bedliner on my truck and it made it look really good. Probably spent like 70 bucks total and I did like 4 coats on the bed. Came out really nice I thoughtWhat bed-liner is that? It looks really nice, looks well done.
For future reference, I've had good luck with:
https://www.permatex.com/products/adhesives-sealants/epoxies/permatex-plastic-welder/
The Harbor Freight plastic welding kit works well too.
Just make sure what you're fixing is scuffed up and cleaned well with isopropyl alcohol.
What the h#ll is going on with this forum lately?Seems to be turning into Corvette Forum!Is the covidinsanity finally taking its toll?