-
-
Tramp stamp applied. -
$190 later, and it drives a heckuvalot better. It's not scary over 50 mph anymore and I feel a lot more confident in Dodgey now. I...
-
Before After They can go much much lower. By the time I got them to where they are I was ready to be done for the day. Im going to put...
-
Years ago, I towed a riced-out Civic that had stickers (more than 1) on it that said "I stretch tires and p****y" - but the car was only...
-
Got the driveshaft in today after work. I wanted to go out for a drive and see how it is, so i attempted to fix the leaking trans to...
-
Welp, took the axle out, drilled new holes in the perches for the spring pins, hooked everything back together and drove it. The 2.76...
-
3 engine failures between 79k and 124k on 3 different trucks will do that to you.
-
DirtBag reacted to 1ton-o-fun's post in the thread Finally got myself a GMT400, '94 C1500 with
Like.
Report for.. 1GCEC19K5RE227112 Vehicle: P/UP C1500 EXT CAB STD BOX Year: 1994 Build Date: 1994-04-06 Found 192,696 vehicles... -
Looks like its less of a basket case and more of a solid fixer-upper to me!
-
03.07.2023 Finished welding the drivers side sections. Didn't need to replace the spool of wire after all...not quite sure what I was...
-
Grinding the flange took 5 minutes. Cleaning out all the debris took an hour. Got it set in place, but I need new u-bolts.
-
Well I started on my injector an lower manifold gasket replacement today an realized I made a bone head move last week. As I was...
-
03.1.2023 My father has the tendency to forget to clean the 3pt finish mower behind he runs behind his 8N after each use. He also seems...
-
Well a guy has turned up the dial on parts acquisition. EGR block off plates, 24lb injectors, distributor sub harness, ptfe fuel lines...
-
After Wally World I went and picked up my sweetie and she'd had the hotel make us breakfast burritos with turkey sausage because we...
-
-
Loading…
-
Loading…
