92Raiderburban
OBS Enthusiast
- Joined
- Sep 28, 2014
- Messages
- 60
- Reaction score
- 36
Just bought a 94 suburban 2500 4x4. Had no gas tank so had to buy one. Sending unit had to buy seperate also. Plastic one from 97 tahoe. The return line port is broken off. TBI unit has 2 fuel hoses. Goin to run high pressure inline pump along frame. Can I delete the return line and plug the tbi unit and only run a feed line for now? Maybe plumb the return line into the feed near the tank? I know using just a feed I will have vapor lock later as it gets hot here in Vegas. Keep in mind I had this setup when I bought my 80 square 5 years ago but that was with an lower pressure pump and 4 barrel carb. Any advice considered.