Supercharged111
Truly Awesome
- Joined
- Aug 20, 2015
- Messages
- 12,942
- Reaction score
- 15,992
Just Valvoline Dex/Merc is plenty good enough. Can get it at Walmart nice and cheap by the gallon. For the front diff, I'd replace pinion seal and output seals. Do the 3 dots to get your preload just right.
Yes that's the rear, same method applies to the front. A dot on the pinion shaft, the nut, and the yoke. It's impossible to be one thread off this way so no use in even counting them.
You must be registered for see images attach
Yes that's the rear, same method applies to the front. A dot on the pinion shaft, the nut, and the yoke. It's impossible to be one thread off this way so no use in even counting them.