4" rear drop completed, low enough for me think the 20's will look real good once I get the front end finished. Has settled @ 31.5" in rear so far, hoping once I get shocks on and drive some it will settle a little more. Hoping on 30" fender height in front and close to that in back, tires will sit at 29".
Wheels will be at the shop in about a week or two. Just need to get the shocks on when they come in and spindles, idler arm + bracket and pit-man arm installed. Then I can get an alignment and start driving it off/on. Then want to have a solid back glass put in and window tint put on.
After that some other stuff I want done later down the road, bed liner, rust fixed, bottom of truck sprayed with bed liner after rust is fixed and install a stereo. Need to hit up the local junk yard for a GMC grill and a few other nick knacks I been eye balling.
Think it was a little passed due for a new set of shocks, just went with bell-tech drop shocks. Hopefully they will give something close to what these junk shocks did b/c they did ride pretty smooth to be blown out.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach