Dan_Frisbie
OBS Enthusiast
Why does someone have to prove a negative?Then prove me wrong.
You prove that you're right!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Why does someone have to prove a negative?Then prove me wrong.
Why does someone have to prove a negative?
You prove that you're right!
Got a 110k mile engine out of the '94 2 door Tahoe for $500.
I plan to do the oil pan, rear main seal, and intake gasket while it's out. I will also do the tbi mods (no cruise on my truck so that will be easy).
Now that there was a significant amount of $ saved vs a rebuild a cam swap is tempting
Since your gonna do the intake when the motors out anyways.. at 110k miles I would, just for piece of mind, do the head gaskets too and send the heads out to get a valve job and new seal. The valve job and new seals are easy to do yourself though if don't want to send them out. That's just what I'd do as an, I've got it out and they are easier to do when the motors out and the intakes coming off already, job....Got a 110k mile engine out of the '94 2 door Tahoe for $500.
I plan to do the oil pan, rear main seal, and intake gasket while it's out. I will also do the tbi mods (no cruise on my truck so that will be easy).
Now that there was a significant amount of $ saved vs a rebuild a cam swap is tempting
Since your gonna do the intake when the motors out anyways.. at 110k miles I would, just for piece of mind, do the head gaskets too and send the heads out to get a valve job and new seal. The valve job and new seals are easy to do yourself though if don't want to send them out. That's just what I'd do as an, I've got it out and they are easier to do when the motors out and the intakes coming off already, job....
Sent from my SAMSUNG-SM-G891A using Tapatalk
For a roller I would have to drill holes in the head right?
I'd **** a chicken if you had to drill a 94 block. My friend's 90 block was tapped and roller ready.