Seeking small air compressor recommendations

[df2x4]

If you want oil in your air.

Brilliant! I'm sure my dad's ancient Hitachi framing nailers would love it.

 

[PlayingWithTBI]

Brilliant! I'm sure my dad's ancient Hitachi framing nailers would love it.

And fish eye in your paint

 

[someotherguy]

The tank will never rust, and all your air tools will be properly lubed. Just don't paint with it.

Actually none of the above because it's an R4 and we all know it'll grenade the moment you're depending on it.

Richard

 

[AuroraGirl]

i wasnt being serious it was a joke about pancakes but on that note

You must be registered for see images attach

whats your opinion on relics of refer past?

 

[Erik the Awful]

My big compressor is an ancient unit I bought off a friend for $100. It's a solid workhorse. If you find an old compressor that runs for cheap, I'd buy it.

 

[PlayingWithTBI]

i wasnt being serious it was a joke about pancakes but on that note

You must be registered for see images attach

whats your opinion on relics of refer past?

It'd probably work as long as you can keep the oil in the crankcase and it doesn't have too much blow by or, you have a way to filter the compressed air. Is that from an old ammonia system?

 

[someotherguy]

i wasnt being serious it was a joke about pancakes but on that note

100% clear on the joke.. I was gonna suggest an HT6 belly leaker instead

Richard

 

[AuroraGirl]

wonder what the difference between ht6 and hr6

 

[AuroraGirl]

It'd probably work as long as you can keep the oil in the crankcase and it doesn't have too much blow by or, you have a way to filter the compressed air. Is that from an old ammonia system?

I believe so the engine is in the forground, i believe it to be an onan

 

[someotherguy]

wonder what the difference between ht6 and hr6

Looks like mount style, most obvious difference, anyway. HT6 has the 4 bolt holes for the Vortec bracket setup where the bolts go down on either side of the case; HR6 has them forward-facing with a flange behind the clutch. I dunno what the HR6 application is? Appears to be the same case design as the HT6, where it leaks in the middle at the case split.

Richard