pressureangle
Latest activity Postings About
-
-
pressureangle replied to the thread Brake vibration/shaking - LONG.BTDT. In my case it was a collapsed brake hose to the caliper. After 1/2 hour or so above 45mph-ish, the rotor got hot and pulsed. When... -
pressureangle replied to the thread Diesel bumper cutouts, Important?.Yours should have the dual thermostat water outlet and big plastic fan, you'll have no worries. I just came back to Florida from North...
-
pressureangle reacted to Drunkcanuk's post in the thread Diesel bumper cutouts, Important? with
Like.
If you are not finding it overheating, I wouldn't worry. But if you're always towing, maybe an issue. -
pressureangle replied to the thread 91 TBI Tuning.I got the 'Stage 1' chip from Brian Harris at TBIchips.com- which seems to be down right now, check it out as we go. I know there are a...
-
pressureangle reacted to HotWheelsBurban's post in the thread Do body lifts make it harder to work under hood? with Haha.
Well ya know since it is a ferd yer gonna be getting under the hood pretty often, guess ya should be comfortable while doing it....
-
pressureangle reacted to User_name's post in the thread Wanting to buy a GMT400, how old is too old, and years to avoid? (discussion) with Like.
Everyone has pretty much covered everything imo. Just don't expect these trucks to be perfect. You will have to sink money into them...
-
pressureangle replied to the thread 94 silverado motor install/ wiring issues.The grounds for all these failures end at the intake manifold grounds. Since you had the motor out, I'd start chasing them there.
-
pressureangle replied to the thread Best rear springs for towing.As stated above, read your owners manual and do a little homework on what the weight ratings mean. If you're towing on the bumper, be...
-
Like @pressureangle, I've worked through this issue on Q-Jets, nearly always with a successful resolution. (And for the remainder...
-
Pressureangle, that is great info, and makes alot of sense. I completely forgot about today's gas being the ethanol mix that would...
-
pressureangle replied to the thread Engine Bay has white smoke after oil cooler delete and pan gasket replaced.Yeah, where is that 'stupid foreseeable **** I did to myself' thread? >drain forklift oil >fill forklift oil >see pool come to my feet...
-
pressureangle reacted to termite's post in the thread Engine Bay has white smoke after oil cooler delete and pan gasket replaced with Like.
:cheers:cheers for taking it as a learning experience, and letting the rest of us ride along. I'm sure we've all done something equally...
-
pressureangle reacted to Boots97's post in the thread Engine Bay has white smoke after oil cooler delete and pan gasket replaced with Like.
Yeah I drove around for a bit and it went away. I've also gotten 2 car washes with the underside done as well. Just drips from leftover...
-
pressureangle reacted to df2x4's post in the thread Engine Bay has white smoke after oil cooler delete and pan gasket replaced with Like.
That would be my guess, especially if any of the oil that blew out made it onto the exhaust. I wouldn't worry about that oil pressure...
-
pressureangle replied to the thread 1995 1500 ac works intermittently.Agree, probably a frozen evaporator. You can verify this, to clarify the above, by turning the A/C to 'vent'- leaving the fan running...
-
-
Loading…
-
Loading…
