96k1500
Ballin on a budget
Upper corner light mod
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Pics of Daves set up and no on you're 32'sDave has some of those too
how about a 2wd with a 2" lift and 32's?
Spikes and center caps!Havnt seen to many people put billet grills in there diesel bumper holes and also have fogs behind the grills. Also oem chevy center caps on there aftermarket rims. And spike lug nut coversYou must be registered for see images attach
So.....wait......you put 3/4T springs, in the front.....with spacers?????I installed 3/4 ton springs with a 2" spacer in my '94 C1500. Was level with a 2" block in the back.
Wasn't alignable, rode like crap, and looking back on it was probably kinda dangerous lol. But it did look good
I wish I could find the old picture I had of it.....
Yeah, I don't trust my gauges either! I need this mod!Camera mount(very solid)
Didn't trust the dash gauges so I added these,not sure how common this mod is
You must be registered for see images attach
:waytogo" on those wheels! I have not seen anyone do that, since the 90's!I dipped my stock rims and my grill. Not too unusual, but I added a couple accent colors. I haven't seen anyone do that on stock rims yet.
Pardon the dirt and ps fluid on the ground. It's on stands right now. I've been working on the pitman arm, idler arm, and ball joints.
You must be registered for see images attach
ALL very functional mods, LOVE IT! Awesome job!I made a cup holder for my crew cab and a nicer version for my wife's obs Yukon that is formed around the front of the console.
You must be registered for see images attach
I also was sick of hitting my shin on my brake controller so I designed a dash mount for it and created a new linkage so that the activation arm could moved via a knob
You must be registered for see images attach
I wanted good trans cooling for my crew that had a zero percent chance of being contaminated by antifreeze through a crack in the radiator sides so I bypassed that junk and added two B&M supercoolers and called it a day. One of the best mods I have done but very controversial when trans guys hear about it. I have done it on two trucks now and it has been nothing but positive.
You must be registered for see images attach
Ford parts and that tire carrier, both AWESOME mods!Not so much original, but I did convert them. I took the plastic chip guards off a F-150 and installed them on my truck. Just a few snips to contour the wheel well ans some double sided tape. The cuts I made are hidden behind the flares.
You must be registered for see images attach
Plus I converted a Tahoe interior spare tire mount to a bed mount.
You must be registered for see images attach
Radio / Navi pic no worky!IPad for a radio/navigation
You must be registered for see images attach
And my MaganCharger with a custom adapter made so it will work with the marine intake. I need to take pictures of what it looks like now that it's all painted, but here's some old pics.
That USB port is a great idea.......I'm gonna steal that idea!Color matched the bowtie emblems on my 1500 badges.
Replaced the cigarette lighter socket with a USB jack for my headunit, along with a 3.5mm input. I'm also thinking about putting a 120v outlet beneath the cargo light switch.
You must be registered for see images attach
No pics but I took the Silverado badges off of my rear pillars and glued the best one on the dash panel where a push-button 4WD switch would be if my truck wasn't 2WD.
Finally, since I hate the radio stations around here, I covered my antenna in heat shrink, mounted it inside the passenger fender and plugged the hole in the fender. I ended up putting it back to stock but if I ever repaint the truck, I'll fill the hole in and go back to running it like that.
You must be registered for see images attach
Radio / Navi pic no worky!