Tight/Binding Steering Issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ruff Idol

I'm Awesome
Joined
May 11, 2021
Messages
103
Reaction score
129
Location
South NJ
First time poster here...92 C1500 with the 5.0 @ 168k. Already replaced the steering box and pump with reman units (fluid was BLACK when I got the truck and pump squealing) and rag joint to eliminate a crap ton of play. There is still some slop in the wheel, but upon jacking it up and shaking tires side-to-side it feels solid. Anyway, it is still very difficult to turn, and if you are within a couple degrees of center, the wheel does not want to return on its own. It seems to get easier the farther you turn in each direction, but feels like it is binding towards center. Ball joints look like factory. Tie rods aren't shot from what I've seen so far.

Anybody deal with this? I'm about to blame not getting a fresh Delco gearbox but don't want to fire the parts cannon yet. It tracks fine, highway especially, but just feels like I get a serious workout from the wheel almost as if there is no power steering.
 

east302

I'm Awesome
Joined
Oct 4, 2013
Messages
3,597
Reaction score
3,611
Location
Jackson, MS
Did it do it before the reman gearbox installation? The plastic cover over the rag joint is back on correctly (though I doubt that would be it)?

Nothing is binding when watching from underneath?

You could try bleeding it some more since that’s pretty much free, but you wouldn’t be the first to get a bad box - even from ACDelco.


Sent from my iPhone using Tapatalk
 

Schurkey

For a pacifist, I sure am a radical mother...
Supporting Member
Joined
Jan 14, 2018
Messages
17,660
Reaction score
27,373
Location
The Seasonally Frozen Wastelands
Perhaps a moderator will move this thread to Stock Suspension + Bolt On Kits.

Lack of return-to-center, and lack of power assist is most-likely a defective PS gearbox. Apparently common in the mass-market rebuild world.
 

SUBURBAN5

I'm Awesome
Joined
Jul 18, 2020
Messages
4,781
Reaction score
8,231
Location
Houston
For 510$ check out this warranty

You must be registered for see images attach
 

east302

I'm Awesome
Joined
Oct 4, 2013
Messages
3,597
Reaction score
3,611
Location
Jackson, MS
They make an AC Delco steering gear?

They sell a reman under the Professional name.

It had nice black paint. Mine stayed in the truck for 1/4 mile before I yanked it out.

Others seem to have no issues, so I guess it’s a complete crapshoot these days.


Sent from my iPhone using Tapatalk
 
Last edited:

alpinecrick

I'm Awesome
Joined
Jun 12, 2015
Messages
1,694
Reaction score
1,839
Location
Western Slope of Colorado
They sell one under the Professional name.

It had nice black paint. Mine stayed in the truck for 1/4 mile before I yanked it out.


Others seem to have no issues, so I guess it’s a complete crapshoot these days.


Sent from my iPhone using Tapatalk

Yeah I have a brand new BBB Industries steering gear in my 96. It’s got play........
 

alpinecrick

I'm Awesome
Joined
Jun 12, 2015
Messages
1,694
Reaction score
1,839
Location
Western Slope of Colorado
Interestingly, I have a Oriellys steering gear sitting on the shelf that has very little play even after 10k miles.

I’m saving it for Special Occasions.....

Of course, I returned two others to Oriellys before I got this one.
 

Schurkey

For a pacifist, I sure am a radical mother...
Supporting Member
Joined
Jan 14, 2018
Messages
17,660
Reaction score
27,373
Location
The Seasonally Frozen Wastelands
They make an AC Delco steering gear?
No.

They SELL an AC Delco steering gear. AC Delco doesn't make it, they don't rebuild it. They have someone else do the dirty work, and then they put the result in their box, and take credit for the whole works.

I bet there's two, maybe three companies actually rebuilding steering gears for the mass-market, and two dozen companies selling their products in custom-printed boxes.
 

east302

I'm Awesome
Joined
Oct 4, 2013
Messages
3,597
Reaction score
3,611
Location
Jackson, MS
Interestingly, I have a Oriellys steering gear sitting on the shelf that has very little play even after 10k miles.

I’m saving it for Special Occasions.....

Of course, I returned two others to Oriellys before I got this one.

It’s funny how that works (well, not really). The only ones that worked for me straight out of the box were a Redhead (Ford Bronco, maybe five years ago) and two Bluetops on my 400s.


Sent from my iPhone using Tapatalk
 

alpinecrick

I'm Awesome
Joined
Jun 12, 2015
Messages
1,694
Reaction score
1,839
Location
Western Slope of Colorado
It’s funny how that works (well, not really). The only ones that worked for me straight out of the box were a Redhead (Ford Bronco, maybe five years ago) and two Bluetops on my 400s.


Sent from my iPhone using Tapatalk

east,
Are the Bluetops still working? I have been tempted to call them about rebuilding mine. My 97 has 166k on it and it's time to fire the parts cannon on the front end.......

I soooo look forward to drilling the BJ rivets out.
 

alpinecrick

I'm Awesome
Joined
Jun 12, 2015
Messages
1,694
Reaction score
1,839
Location
Western Slope of Colorado
No.

They SELL an AC Delco steering gear. AC Delco doesn't make it, they don't rebuild it. They have someone else do the dirty work, and then they put the result in their box, and take credit for the whole works.

I bet there's two, maybe three companies actually rebuilding steering gears for the mass-market, and two dozen companies selling their products in custom-printed boxes.


I know, I know........
 

Forum statistics

Threads
78,135
Messages
1,645,632
Members
81,337
Latest member
1998SierraCCZ71
Top