Frank Enstein
Best. Day. EVER!
It did on my 92.I have a feeling that it won't but I am not sure. @sewlow would know if he happens to see this. Welcome to the forum and be sure and post the answer.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It did on my 92.I have a feeling that it won't but I am not sure. @sewlow would know if he happens to see this. Welcome to the forum and be sure and post the answer.
Check that the evaporater drain isn't plugged by a dirt dobber or something.Got the drill and wire brush out today. Wasn't really as bed once I got a couple of passes with the brush. Looked worse than it was. Sheet metal is very solid. Got it all cleaned up and did 2 coats of POR-15. Should be cured by tomorrow and I can get the new insulation down.
You must be registered for see images attachYou must be registered for see images attach
yes, I need the left 60 portion of the 60/40 seat side. Just the clip not the fold down panel. If i can name it I can find it.
Got the drill and wire brush out today. Wasn't really as bed once I got a couple of passes with the brush. Looked worse than it was. Sheet metal is very solid. Got it all cleaned up and did 2 coats of POR-15. Should be cured by tomorrow and I can get the new insulation down.
You must be registered for see images attachYou must be registered for see images attach
Yes, heater core was toast.I may have missed it, but did you ID the source of the water leak onto the floor?
What is this?
You must be registered for see images attach