User_name
T.B.I Guy
Hey guys. I have a set of carquest plug wires on my 1995 chevrolet c2500 with the 5.7tbi and nv4500.
I was wondering why I had a steady stumble and last night I opened my hood and decided to check for a lightning show.
What I saw was 3 cylinders on the odd bank and 2 cylinders on the even bank arcing close to the plugs.
I inspected and found no burnt spots or cuts on the wires. The boots are all seated on the plugs with a CLICK and I even tried a little dielectric grease on the boots just to be sure.
Never had this problem before.
I'm looking at a set of acdelco and a set on ngk wires now (delco part# 9718D and ngk part# 51106).
I am also open to other brands and I always route my wires as the factory did (around and behind the heads)
Thank you
I was wondering why I had a steady stumble and last night I opened my hood and decided to check for a lightning show.
What I saw was 3 cylinders on the odd bank and 2 cylinders on the even bank arcing close to the plugs.
I inspected and found no burnt spots or cuts on the wires. The boots are all seated on the plugs with a CLICK and I even tried a little dielectric grease on the boots just to be sure.
Never had this problem before.
I'm looking at a set of acdelco and a set on ngk wires now (delco part# 9718D and ngk part# 51106).
I am also open to other brands and I always route my wires as the factory did (around and behind the heads)
Thank you