The_Family_Tahoe
I'm Awesome
I bought new moog stock replacement springs and I can't get them to seat in the lower control arm pocket. I rented a coil spring compressor from the local retailer but I can't fit it inside the spring and then install it on the truck, a 2wd Tahoe, 1999 model. Is there a truck to getting the spring to seat properly? I have the top lined up with the teeth that center of in the upper spring bucket, but the bottom of the spring is clocked 90 degrees or so off the mark. How do I get these springs lined up correctly?
These are the springs Moon cc648
This is the coil spring compressor I rented.
These are the springs Moon cc648
This is the coil spring compressor I rented.