Door Foam Piece Part #/Name

[Caman96]

Front ends are usually ripped off or hanging on by a thread on enough trucks that it shouldn’t be bad. I always carry fishing line with me when I go there. Saved my butt once or twice.

I’ve honestly never seen this part.

I’ll take a picture tomorrow.

 

[df2x4]

I just spent a good 20 minutes looking through diagrams on Nemiga and I can't find any evidence of this thing... I wonder if it came as part of whatever "assembly" it's glued to?

 

[Caman96]

I just spent a good 20 minutes looking through diagrams on Nemiga and I can't find any evidence of this thing... I wonder if it came as part of whatever "assembly" it's glued to?

I looked there too, but thanks. The black crud in first picture is the old glue that held it in place.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

To me it’s function is to seal off cavity behind door hinges.

 

[Caman96]

This photo is showing from inside cab with door open, you can see into fenderwell area.

You must be registered for see images attach

 

[l1lartur0]

This piece is behind inner fenders and is some type of barrier to door hinges. There’s no part number on them, just wondering if anyone knows its name, part # or maybe an aftermarket source? My passenger side is damaged, I might be able to repair, but if ones available, that would be easier. One for sale works too!

You must be registered for see images attach

I’m guessing for any 88-98.

Pulled pic from eBay. Guessing it's part number 8. Name/number of part? Still on the hunt...

ADDENDUM: Fender seal (P/Ns 15646325 and 15646326). Discontinued.

Courtesy Chevlolet Center

 

[fancyTBI]

I have never seen this piece haha. Need to go check the GMC.

 

[l1lartur0]

I have never seen this piece haha. Need to go check the GMC.

Me either. We be learning something new every day!

These are missing on my truck. Curious if yours are still present, @fancyTBI.

 

[fancyTBI]

Still pouring here so can’t check my WT but I don’t see it on my Sierra.

 

[Caman96]

Me either. We be learning something new every day!

These are missing on my truck. Curious if yours are still present, @fancyTBI.

Thank you. Apparently they are a fender to cowl seal.
To bad these don’t fit.

https://www.classicindustries.com/product/*r81916.html

 

[SNCTMPL]

Mine wasn’t glued on. Here’s a couple of pictures of them, or where the passenger side is supposed to be.
In the first pic you can see the three screws and what’s left.
Sorry my firewall is so dirty it won’t be for long.

You must be registered for see images attach

You must be registered for see images attach