rhino
I'm Awesome
This is a cheap trick we do a good bit if a customer doesn't want to spend the $ for a shift kit, but wants a good harsh shift. Thought I would share.
This is a stock servo...
Take the snap ring out, and remove the spring
Discard the spring, and shim the cover with a few large washers. Make it so the snap ring will barely fit in the groove. Make it TIGHT! That will give you a great 1/2 shift.
This is a stock servo...
You must be registered for see images attach
Take the snap ring out, and remove the spring
You must be registered for see images attach
Discard the spring, and shim the cover with a few large washers. Make it so the snap ring will barely fit in the groove. Make it TIGHT! That will give you a great 1/2 shift.