Jorge6.5
I'm Awesome
Well my current 305 is in poor shape and low on power. I've been wanting to replace the motor as stated in my last thread.
Currently do not have the funds for a new motor. My cousin has a low miles 305 same as my motor that I just bought for $150. I figured its a good deal even for a 305. So what I would like to do is throw on some parts to get some power out of the wimpy 305, I'm not expecting much just more then stock.
I would like to swap the cam in it for a better/larger cam. Nothing crazy, just a bump up from stock. Power has to be in the idle to 5000rpm range and must work with the tbi unit.
My plans for the motor are to add a rebuilt tbi with all the ultimate mods, pod spacer and adjustable pressure regulator. An edelbrock performer carb manifold non egr and a tbi to carb adapter on top and some headman long tube headers into 3" collectors into single 3" exhaust
I want to have the chip reprogrammed for those mods, delete the egr and air injection
Any input on cams for this setup would be appreciated. I know it's only a 305 tbi, I'm not looking for huge gains just a boost over stock power levels. I figure why not since I only paid $150 and I would like to learn some experience with engine mods
Thanks!
Currently do not have the funds for a new motor. My cousin has a low miles 305 same as my motor that I just bought for $150. I figured its a good deal even for a 305. So what I would like to do is throw on some parts to get some power out of the wimpy 305, I'm not expecting much just more then stock.
I would like to swap the cam in it for a better/larger cam. Nothing crazy, just a bump up from stock. Power has to be in the idle to 5000rpm range and must work with the tbi unit.
My plans for the motor are to add a rebuilt tbi with all the ultimate mods, pod spacer and adjustable pressure regulator. An edelbrock performer carb manifold non egr and a tbi to carb adapter on top and some headman long tube headers into 3" collectors into single 3" exhaust
I want to have the chip reprogrammed for those mods, delete the egr and air injection
Any input on cams for this setup would be appreciated. I know it's only a 305 tbi, I'm not looking for huge gains just a boost over stock power levels. I figure why not since I only paid $150 and I would like to learn some experience with engine mods
Thanks!