383 Stroker No Oil To Most Rockers

[IOWNJUNK]

Turn motor over by hand as you prime.

 

[eg30.06]

today I finally got the engine primed. It took about 20 minutes with the drill and rotating it a couple times and finally got oil to all of the rockers.thanks for all the help guys I think my main issue was the fact that the oil was only 30 degrees.

 

[HighDesertChevy]

When we rebuilt my first 350 I remember my pops saying unless the crank is cross drilled it oils at 180 degrees. Something to that extent but it's been a while, just food for thought.