Harness is. I got the PCM and VSSB from online order specific for my tires and 4.10 ratio.
Just tested some wires using a dummy harness I had.
TCC Solenoid= Good 25 Ohms reading, no clicking sound when 12v+G applied
3-2 control Solenoid= Failed Ohms reading/infinite, no clicking sound when 12v+G applied
1-2 Shift Solenoid= Good 21 Ohms reading, can hear clicking sound when 12v+G applied
2-3 Shift Solenoid= Good 21 Ohms reading, can hear clicking sound when 12v+G applied
Pressure Control Solenoid= Good 4 Ohms reading
Trans Fluid Temp Sensor= Failed Ohms Reading/infinite
Thoughts? Should I replace some stuff?