Search results

  1. ISwearItsStock

    Did Rear drums with 10in drums and still have a soft pedal

    could be the o rings on the master cylinder. mine was soft and this was the issue.
  2. ISwearItsStock

    engine controls, circuit 439, 98 l31

    Yes, used a DMM with batt d/c'd. Going now to finish up since it looks like it isn't getting any warmer out... -19°c lol -30 with the w.c.. F%$k yeah! Update: checked all connectors with that pink #439 in it and they're all purdy. Disconnected the harness completely but the DMM didn't like the...
  3. ISwearItsStock

    engine controls, circuit 439, 98 l31

    This circuit is hot in run and crank and supplies the PCM, ICM, ckp sensor and injector coils with 12v+, so am I safe to assume that it shouldn't act as a ground with the key off? Only makes sense that there's a short to ground right? This is with PCM disconnected. Its -25c now so I quit for...
  4. ISwearItsStock

    L31 Intake Design / Build project

    Thanks lads, you guys are awesome. I've finally started the prototyping, so I'll try to keep you up to date one it's complete and functional.
  5. ISwearItsStock

    L31/L30 intake manifold

    So how's the intake comin along? I finally got the ball rollin with my prototype, so I'm lookin forward to see what you come up with too! I'll try to get everything on my thread once I'm done, for all to chuckle at! lol cheers!
  6. ISwearItsStock

    What kind of mileage do you get?

    4.88s huh? deemn. I forgot to count the teeth, but I run at 120km/h@2krpm highway and 120km/h@5krpm city LMAO and before the sensors were fixed I could watch the needle go down a line with every WOT! Now that the engine's up to par, it's fairly decent for an L31 and a heavy foot. Just couldn't...
  7. ISwearItsStock

    Ontario Canada members

    What's with the harassment? Am I not supposed to try and see who's active from my area on here? Or should I have started a new thread? I don't see the problem. Why are the threads still here and unlocked if I'm not to post in them? 1st one I get - it was a random, but I have a legit reason for...
  8. ISwearItsStock

    I love free stuff!

    lol yup. I was bored. Yeah I hear ya on the handles, the oldies were the only stock ones I got along with. I just figured white cuz it's TX ain't it. Black's what I use too.
  9. ISwearItsStock

    Show Your Garage / Work Area!

    ...then I pull up thru the ditch, linelock the front and stomp it. how ya doin' o.0 sheeeit that ain't park, oOoops. lol forgive me, I need sleep.
  10. ISwearItsStock

    Ontario Canada members

    LMFAO Only about 87% of us. give or take 13% to factor in for unbuckled dirty wives. Gas is $%*%$%#$ expensive as ^&*) here, so I think that's the excuse. When I lived in TX it was $.89/gal, and here/now it's $1.20/l FML and build a still. -and we do a lil jig when we get bumshagged by the...
  11. ISwearItsStock

    Canada Call Out

    ^ Good pic bro. Add another '98 K for life from Ottawa
  12. ISwearItsStock

    My wiring diagram repository (try here first)

    Canadian, eh? Right on. You need 94 hvac component view diagrams (showing actual parts instead of wiring schematics)? That beast is a 94? I might be able to dig through some infoheaps for a fellow Ontario lad..
  13. ISwearItsStock

    The Stupid Interior Questions Thread

    LMFAO True story. I second the neutral being grey, I think tan was "beige".
  14. ISwearItsStock

    I love free stuff!

    That's one way to have enough cup holders! ..IMO that dually would look fookin amazing with a shave and matte white
  15. ISwearItsStock

    Misc parts

    Yes shackles are the same.
  16. ISwearItsStock

    "DIRTY A5S CHEVROLET" -Black '98 k10753 L31 4L60-e- DD to Pre-runner

    Step 1: fail emissions test- sawut? Yea, check engine light was BURNT out. I guess I was to anxious to drive the damn thing.. So if you're buying any used vehicle, I highly recommend an odb scanner to start off with. I find out all that's wrong with it is a couple HO2 sensors, and a cam position...
  17. ISwearItsStock

    New with noob problems! (rebuild of 1997 5.7 Vortec with incompatible block?)

    no donut in the pipe.. I thought I was a hackjob... o.0 Hope your luck gets better and I'd suggest keep doing what you're doing... Questioning and learning... and getting grease everywhere. BTW Horns, I fkn love your Rusty Junk sig
  18. ISwearItsStock

    L31 Intake Design / Build project

    cool thanks guys. That's what I figured and found out. I was thinking well, sxxt, I'll just swap heads, no... different block completely.. Since the 5.3 mani was cheap and the guys down at the boneyard hook it up nice, I'll probably see what kind of mess I can make with all this plastic. maybe...
  19. ISwearItsStock

    L31 Intake Design / Build project

    And what's the deal with the 5.3 l51 intake? looks like a LS intake, but says Vortec on it... Inter-compatibility with l31? Do i waste $16 at the u-pull tomorrow? ..yeeeessss.... lol might cop a set of coilpacks and the fly by wire and and and
  20. ISwearItsStock

    12200411 PCM swap for 1996 to 2000 GMT400 trucks

    Much Thanks Thanks for doing all of this for us Jeff. I got started doing the cross reference myself, and got yours right after I started, saving me a pile of time and I appreciate it. On a quick glace I know you took a lot of effort to do this spread and that it's good to go. I can't wait to...
  21. ISwearItsStock

    L31/L30 intake manifold

    ok so I'm not the only one willing to get their hands dirty and show GM how it's supposed to have been done. Godspeed my friend. keep us informed. I think I'll send a FR matter of fact. you seem like a plethora of knowledge...
  22. ISwearItsStock

    How to get Coil per Cylinder and LSx ignition control on a L31 SBC Write up

    I knew some of you would've already thought of this! :hail: lol Thanks A LOT. I was planning on figuring it out after looking at the wife's '00Wbody and seeing that ign.. I grabbed the 411 off a silvy today, maybe I'll go check out the rest of that beast tomorrow....
  23. ISwearItsStock

    12200411 PCM swap for 1996 to 2000 GMT400 trucks

    Finally got me hands on one off a silverado for a fair price. Lookin forward to this, the manifolds and the suspension BIGTIME. Jeff, I'll be PMin ya.
  24. ISwearItsStock

    The Stupid Interior Questions Thread

    Let me know exactly what diagrams u need. I have access to GM db. Dash? Plastic trims? Doors? I've no complete exploded view diag.
  25. ISwearItsStock

    LOW4X4's new LED project

    Umm, that's f*&king space age pimpin'. Glad to see my laptop plans are feasible. your console deserves a :hail: unberuckinleivable. just unberuckinlevable...

Latest posts

Staff online

Members online

... and 10 more.
Total: 1,710 (members: 60, guests: 1,650)

Forum statistics

Threads
64,358
Messages
1,392,076
Members
51,484
Latest member
Darkscythe

Share this page

Top