I've been working of my transmission a few hours a night for the past week and wanted to share my progress. It was filthy to start with. Had to use a spray bottle with water and dish soap and a screw driver to clear most of the bolts
got the Tcase out
Started cleaning up the Tcase
and the Transmission is out finally
cleaning up the transmission
started tearing down and inspecting
my valve body bolt map
hard parts removed
disassembled the pump
bunt 3-4 clutch pack
input drum with new frictions and steels. Went with a 7 friction setup. got .034" on the forward pack and .043 on the 3-4. Also installed new boost springs
valve body dissembled for cleaning
hard parts reinstalled in the case
I picked up a new 3-4 accumulator piston, purple (stiffer) springs for the 1-2 and the 3-4 and vett servo. Ill have to finish it up next week.
You must be registered for see images attach
got the Tcase out
You must be registered for see images attach
Started cleaning up the Tcase
You must be registered for see images attach
and the Transmission is out finally
You must be registered for see images attach
cleaning up the transmission
You must be registered for see images attach
started tearing down and inspecting
You must be registered for see images attach
my valve body bolt map
You must be registered for see images attach
hard parts removed
You must be registered for see images attach
disassembled the pump
You must be registered for see images attach
bunt 3-4 clutch pack
You must be registered for see images attach
input drum with new frictions and steels. Went with a 7 friction setup. got .034" on the forward pack and .043 on the 3-4. Also installed new boost springs
You must be registered for see images attach
valve body dissembled for cleaning
You must be registered for see images attach
hard parts reinstalled in the case
You must be registered for see images attach
I picked up a new 3-4 accumulator piston, purple (stiffer) springs for the 1-2 and the 3-4 and vett servo. Ill have to finish it up next week.