My 1995 K1500

[Chris.G.Jr.]

Wanna send me all those parts? Lookin good

Ha you plan on hooking me up with a clean LQ9 6.0 and 4L80E with harness, computer, etc?????

Look, there are other Okie's on this forum!

Looks exactly like my first truck. Mine was 95 K1500 4x4 (not z71) 305 (great mpg) 3.42 posi and custom ordered w/ leather seats and rubber floors. Bought it when I was 15, from the old man my dad used to lease some land from. It had 80K miles then and I had it until a year ago at 247K all original. Saw it the other day and its looking like the end of the road for the old girl.

Good luck with your truck, I hope after the new engine it treats you as good as mine did me.

thanks man! I actually picked up mine from my neighbor back when i lived in edmond bout 2-3 years ago! He hardly ever drove it, it only has 160k on it now or a little over but she needed an oil pump when we first got it, replaced that then about 6 months ago the ole 350 tbi crapped out, but shes treated me well, theres a few minor things wrong with it, ac window motors, headlights wont line up right, just little things but its a solid truck!

Whereabouts are ya from in Okie Land?

 

[tanman_2006]

Northwest corner between Enid and Woodward

Source Unknown

 

[Chris.G.Jr.]

Northwest corner between Enid and Woodward

Source Unknown

ahh nice, never gotten into that neck of the woods

 

[Chris.G.Jr.]

so my parents were nice to me this year and got me some LED Taillights!!

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

before the motor comments the work starts saturday!!!

yes i know the trucks dirty :\

 

[Ladyzm18]

Awaiting engine time


Sent from my iPhone using Tapatalk

 

[Chris.G.Jr.]

Awaiting engine time


Sent from my iPhone using Tapatalk

itll be in tomorrow!

 

[Chris.G.Jr.]

Well got to work on the engine today and well uhm it appears the engine wasn't exactly cared for as well as the truck appeared.....(referring to PO)

got everything put on the engine (except a few things that'll go on when its in) lost daylight so we will drop it in tomorrow and button everything up and she should be done!

also thought it would be the best time to install my ground strap kit i bought! see as how one was basically almost fully cut in half

on to pics

took her over there last night

You must be registered for see images attach

You must be registered for see images attach

fixing to pull

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Out

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Fresh out of the crate

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Build date

You must be registered for see images attach

engine was sideways sorry

You must be registered for see images attach

You must be registered for see images attach

waiting for tomorrow to be dropped in.

You must be registered for see images attach

You must be registered for see images attach

welllll heres something NOONE wants to see (this sh!it was caked and crusted on) was a pain to clean the underside of the intake manifold.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Hunttman01]

Big Update!!!!!!!!!

MOTOR IS IN AND ALL PARTS ARE HERE!!!

Probably wont start the work til next week, possible next weekend due to helping my sister move this weekend and weather.

PICS!
2 Magnaflow Mufflers (Exhaust will be 2.5 piped from manifolds to each muffler, dumped after axle)

You must be registered for see images attach

You must be registered for see images attach

Original replacement 350 crate

You must be registered for see images attach

You must be registered for see images attach

Thought truck would squat with the engine back there, no squat at all.

You must be registered for see images attach

had to cover the motor and lock it up, plus the shell has to stay on for the florida trip

You must be registered for see images attach

You must be registered for see images attach

All my parts plus motor

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Parts:

ACDELCO Waterpump
ACDELCO Spark Plugs
ACDELCO Spark Plug Wires
ACDELCO Distributor Cap
ACDELCO Distributor Rotor
ACDELCO EGR Valve
ACDELCO EGR Gasket (didnt show it was included with egr valve but was)
ACDELCO Thermostat
ACDELCO PCV Valve
ACDELCO Fuel Filter
ACDELCO Throttle Body Gasket
ACDELCO Intake Manifold Gasket
Felpro Exhaust Manifol Gaskets
Standard Motor Products Multifunction Switch

Window motors will have to be ordered later

What'd the parts run if you don't mind me asking?

sent from my broke down vortec

 

[98chevyz71]

and ****** still hasn't finished his heads
Truck is coming along great Chris, keep up the great work!

 

[twomanymontes]

The tail lights look cool. Glad to see a new motor going in. Hate to see a clean truck like that get pounded into the ground.