just ordered clear tailights but what do i do with the extra holes?

[Problem2420]

i just ordered these clear and red taillights.

You must be registered for see images attach

but i have no idea what to do with these extra holes and this connector.

You must be registered for see images attach

any ideas?

 

[TruckinAin4Sissies]

Wow. It looks like you'll have to find a new Taillight Board first. The ANZO brand has the separate reverse bulb like that one.

 

[Problem2420]

Would it be possible to just cover the holes and use an original taillight board?

 

[TruckinAin4Sissies]

Plug: yes.
OEM style board: no because the existing reverse light'll get in the way.

 

[Marcos]

Take that reverse light out and use the oem board

 

[squeaky3]

looks like someone had strobes in all the lights...hence the extra holes

infact that is a strobe bulb in there right now...notice the 3 wires and the rectangle end...that is deff a stobe bulb not a regular bulb, do not hook that up like a normal bulb or it will burst

im assuming you bought those used?

 

[squeaky3]

once you take out that strobe bulb and put filler pieces over the holes facing out on the pics you can put a regular tail light board in there

 

[TruckinAin4Sissies]

looks like someone had strobes in all the lights...hence the extra holes

infact that is a strobe bulb in there right now...notice the 3 wires and the rectangle end...that is deff a stobe bulb not a regular bulb, do not hook that up like a normal bulb or it will burst

im assuming you bought those used?

NOW I see what you're saying. (The orientation through me off)

 

[squeaky3]

ya i had to look at it a few times...i read the posts then went back and looked real close and noticed the strobe wires and the big holes with screw holes on each side...then i realized that the lights were on their side too

 

[jdyates]

I like them! And after spending the past hour cleaning my OEM tails in and out, i can pretty much tell you that the cutout looks like it would fit the OE board no problem.

If you dont mind me asking, where did you get them? I wouldnt mind a tinted set!