Any camo interiors here?

[superchevyguy93]

@Fallsey how did u do the bottom of the door?

 

[Fallsey]

I took the door panel apart. That bottom section was a pain. The 10-12 factory press melt spots, I used a dremel with sanding bit to "thin" the material out to the point where I could seperate it. I also removed the factory speaker grille. I then used a plastic bone tool to push the fabric in tightly to the groove. I used a strong adhesive to keep in in place in the groove, stretched the material out around all the edges, and glued tightly. Then I used a good epoxy to put the panel back together and coated the old plastic backing in more epoxy "where the spot welds were originally"


Sent from my iPhone using Tapatalk

 

[Fallsey]

You must be registered for see images attach

You must be registered for see images attach

Sent from my iPhone using Tapatalk

 

[Fallsey]

You must be registered for see images attach

You must be registered for see images attach

Sent from my iPhone using Tapatalk

 

[dmr22]

That looks great! Want to do mine?!?! haha!

 

[blueridgerobbie]

The wifes Suburban is underway and coming along nicely. Totally gutted the whole interior and changing everything to black and Realtree. I will post pics soon

 

[Fallsey]

Sometimes you just have to imagine what you can make out of a piece of firewood

You must be registered for see images attach

Sent from my iPhone using Tapatalk

 

[Fallsey]

Few coats of poly and it's done

You must be registered for see images attach

Sent from my iPhone using Tapatalk

 

[Fallsey]

Here are some finished pics. Turned out very similar to the photoshopped pics

You must be registered for see images attach

Sent from my iPhone using Tapatalk

 

[Fallsey]

Another few shots...

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images