I've come to realize, marker lights for the dually fenders, are kind of hard to come by, and seems LMC are the only ones selling new, but at $50 a piece, I thought I'd go a different way.
I was missing one, and after lucking up and finding a couple in "decent" shape at the junkyard, I was ready to start. Since mine were not in the best of shape, I didn't mind cutting them up...
You must be registered for see images attach
Took the backs out, so I could fit these LEDs I got online...
You must be registered for see images attach
Got them fitted, then made the attempt to make the lens a little more presentable. Left is wet sanded in steps, starting with taking the raised letters off, and finishing up with 2000 grit sand paper. Right is what I started with.
You must be registered for see images attach
Once all the sanding was done, shot a couple coats of automotive clear on them. Shiny and slick.
You must be registered for see images attach
Cleaned up and painted all the associated hardware too.
You must be registered for see images attach
I realize now, I forgot to get pics of the back, but I'll say. Instead of glueing the LEDs in, I used some ultra clear sealant to hold them in, but mostly to seal them. Having them installed is more than enough to hold them together, and if I ever need to change the LEDs, they'll be pretty easy to get apart.
Did most of that last week, and installed them today...
You must be registered for see images attach
You must be registered for see images attach
Want to ditch the W/T frontend for what I call the good one, put new lens, and LEDs on the cab lights, and debating whether to rehab the tails, or buy a set of LED versions.
You must be registered for see images attach
Real happy with how this turned out.