14 bl sf swap question

[chevyboy98]

im doing a 14 bolt swap atm and im almost ready to put the new axle in, do i need a special ujoint? or will it be the same? also what oil do i run in it same as my 10 bolt was? ill post a pick of why i need to do the swap lol

You must be registered for see images attach

You must be registered for see images attach

 

[chevyboy98]

can you spot the problem here? haha

 

[RHamill]

im doing a 14 bolt swap atm and im almost ready to put the new axle in, do i need a special ujoint? or will it be the same? also what oil do i run in it same as my 10 bolt was? ill post a pick of why i need to do the swap lol

You must be registered for see images attach

You must be registered for see images attach

You will need bigger U-Bolts, U-Joint from a 14 bolt.

 

[JonZ71]

or u joint number 447 from napa.

 

[JonZ71]

You will need bigger U-Bolts, U-Joint from a 14 bolt.

you cannot just take a u joint out of a 14bsf driveshaft and put in a 10bolt driveshaft, you have to get a conversion joint

 

[RHamill]

you cannot just take a u joint out of a 14bsf driveshaft and put in a 10bolt driveshaft, you have to get a conversion joint

I meant to say "For" not "From".

 

[chevyboy98]

or u joint number 447 from napa.

Is that the u-joint to convert my 10bolt drive shaft to
My 14 bolt diff??

 

[dirtridinz71]

Is that the u-joint to convert my 10bolt drive shaft to
My 14 bolt diff??

Yes it is. Another option is that you can swap yokes from your 10 bolt to the 14bolt to eliminate the need for any conversion joint and keep running the same one.

 

[chevyboy98]

Thanks guys orderd 2 they were only 3 bucks a each.. Doesent sound right to me but ill tale it haha

 

[JonZ71]

ordered what for 3 bucks each?

http://napaonline.com/Catalog/Result.aspx?Ntt=447&Ntk=Keyword&Nty=1&Dn=0&D=447&Dk=1&Dp=3&N=0